View Task
Husqvarna GTH2548
>>
Maintenance Schedule
>>
Change Engine Oil
Description
Instructions
TO CHANGE ENGINE OIL (See Figs. 15 and 16) Determine temperature range expected before oil change. All oil must meet API service classification SF-SJ. • Be sure tractor is on level surface. • Oil will drain more freely when warm. • Catch oil in a suitable container. • Remove oil fill cap/dipstick. Be careful not to allow dirt to enter the engine when changing oil. • Remove yellow cap from bottom fitting of drain valve and install the drain tube onto the fitting. • Unlock drain valve by pushing inward and turning counter clock wise. • To open, pull out on the drain valve. After oil has drained completely, close and lock the drain valve by pushing inward and turning clockwise until the pin is in the locked position as shown. • Remove the drain tube and replace the cap onto to the bottom fitting of the drain valve. • Refill engine with oil through oil fill dipstick tube. Pour slowly. Do not overfill. For approximate capacity see “PRODUCT SPECIFICATIONS” section of this manual. • Use gauge on oil fill cap/dipstick for checking level. Insert dipstick into the tube and rest the oil fi ll cap on the tube. Do not thread the cap onto the tube when taking reading. Keep oil at “FULL” line on dipstick. Tighten cap onto the tube securely when finished.
Task Type
Preventive
Inspection
Clean
Repair
Modify
Takes asset out of service
Priority
Low
Medium
High
Estimate
Hours
Part
Quantity
Motor Oil 10W30
2
qt.
Triggers
Whichever comes first
By Meter
Every
Hours
Starting At
Hours
By Time
Every
Hours
Days
Months
Years
Starting At
Hours
Limit
occurences
No public attachments