View Task
Husqvarna GTH2548
>>
Maintenance Schedule
>>
Clean Battery and Terminals
Description
Instructions
Your tractor has a battery charging system which is suf fi cient for normal use. However, periodic charging of the battery with an automotive charger will extend its life. • Keep battery and terminals clean. • Keep battery bolts tight. • Keep small vent holes open. • Recharge at 6-10 amperes for 1 hour. NOTE: The original equipment battery on your tractor is maintenance free. Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary. TO CLEAN BATTERY AND TERMINALS Corrosion and dirt on the battery and terminals can cause the battery to “leak” power. • Remove terminal guard. • Disconnect BLACK battery cable fi rst then RED bat- tery cable and remove battery from tractor. • Rinse the battery with plain water and dry. • Clean terminals and battery cable ends with wire brush until bright. • Coat terminals with grease or petroleum jelly. • Reinstall battery (See “REPLACING BATTERY" in the SERVICE AND ADJUSTMENTS section of this man u al).
Task Type
Preventive
Inspection
Clean
Repair
Modify
Takes asset out of service
Priority
Low
Medium
High
Estimate
Hours
This task uses no parts
Triggers
Whichever comes first
By Meter
Every
Hours
Starting At
Hours
By Time
Every
Hours
Days
Months
Years
Starting At
Hours
Limit
occurences
Photo
No public attachments