View Task
Fantech SER 150
>>
Maintenance Schedule
>>
Check and Clean Filters
Description
Instructions
1. Remove both filters by sliding them out. 2. Remove the core from the unit. 3. With one of your core's air inlets facing down, place it in a large sink, bathtub, or shower. 4. Pour clean tap water through the face of the core facing upwards until it runs clear. Ensure the entire surface is rinsed. 5. Rotate the core so that its other air inlet is facing down and repeat step 5. 6. With plates still oriented vertically allow the core to dry, normally 2-3 hours. 7. Slide back the core into the unit 8. Replace both filters
Task Type
Preventive
Inspection
Clean
Repair
Modify
Takes asset out of service
Priority
Low
Medium
High
Estimate
Hours
This task uses no parts
Triggers
By Time
Every
Hours
Days
Months
Years
Starting At
Months
Limit
occurences
No public attachments